Search
Browse Categories
Links
Credit Cards
Installation Instructions for the Covermate II Understyle
  1. Position the spa cover (in closed position) on the spa, making sure that all four corners are properly positioned and square on the spa.


  2. Slide mounting bracket under spa. (See Figure 1.)

    NOTE: Be sure to use the Pivot Hole closest to the back of the spa.


  3. Using the 3/8" x 3" bolts, metal washers, and lock nuts, connect the Pivot Arms to the Mounting Brackets.


  4. Insert the long end of the Support Arms into the Coupler Piece. Then slide Support Arms into the top pivot arms.

    NOTE: The Upper Support Arm is the longer of the two Support Arms.

    Next, insert the Lower Support Arms into the other Coupler Piece, then slide the Lower Support Arms into remaining end of the Pivot Arms.


  5. Lay the assembled Covermate on the spa cover. Adjust and center the Upper Coupler Piece and Support Arms so that the Coupler Piece is laying parallel to the spa cover's hinge about 1/2" away. (See Figure 4.)
    Using the #10 self tapping screws, fasten Support Arms to the Coupler Piece.

    NOTE: Be sure to rotate the Coupler Piece so that the inserted screws are at a horizontal angle with heads facing the back of the spa.

    Repeat this procedure for the lower Support Arms.


  6. Slip the black hand grips to the edge of the spa cover and snap back plastic screw head covers on.
    You are done!
Shoppnig Cart
Items: 0
Total: $0.00
View My Cart
Checkout Now