|
Home > ideal_lift_install3.html
| | |
|
|
Assembly
|
D. Cover Assembly
- Gently place the folded Cover Lift cover on top of the hot tub with the cover's seam (fold) facing the control panel so that the flap on the cover is flush with the edge of the cabinet.
- Loosen the Lock Knob and pull the Extension Arm to a horizontal position.
- Using a Phillips head screw driver, remove the screw and nut from the adjustable arm.
- Now, Slide the Extension Arm until it sits between the fold's flaps along the cover's fold seam (figure 6.).
- Line up the hole in the adjustable arm and replace the screw and nut.
- Now, flip the one half of the folded cover over until it covers the remainder of the hot tub.
- Take one of the Handle Bars and insert it into the top of the Molded Saddle, located on the end of the Extension Bar.
- Using a 2 1/2" bolt and Nylock Nut, fasten the Handle Bar to the Extension Arm. Be sure to tighten until at least one thread of the bolt is through the Nylock Nut.
- Insert the Torsion Bar into squared end of the mounted Handle Bar, then insert the opposite end of the Torsion Bar into the remaining Handle Bar. Be sure to put equal amounts of the Torsion Bar into each Handle Bar
- Using a 2 1/2" bolt and Nylock Nut, secure the other Handle Bar to the Molded Saddle of the remaining Extension Arm.
|
|
|
Operation
|
A. Lifting
- Before lifting the cover, make sure there is nothing on the cover.
- Look to see that there is no overhead obstruction that could interfere with the covers trajectory (lights, wires, branches, etc.).
- To lift the cover, simply grab a hold of either Handle Bar, and lift in an upward motion.
- The hydraulic arm of the Cover Lift will provide the necessary power to assist in lifting the cover.
- Bring cover to its full upright position, the cover will hang slightly toward the hot tub, tighten the lock knob for extra secure hold of raised cover. Loosen knob to lower and tighten again when closed.
- The Cover Lift cover provides excellent heat retention when in place, and acts as a sound baffle and privacy screen when in the lift position.
|
|
| |
| | |
|
|
|