1. Home
  2. Troubleshooting Guide For Spa And Hot Tubs

The following information will not only help you in troubleshooting your spa, but will also guide you step by step in repairing it.

Hot Tub Technical Facts Sheet (Excellent Resource)
GFCI Load Center Wiring Examples
SpaSide/TopSide/Keypad Error Codes
Heater Element Evaluation
Testing A "Plug Style Balboa Transformer ------- Defending The Transformer
Sensor Resistance Values For: Balboa - Vita - Brett - Gecko - Hydro Quip Circuit Boards


All the information below is for mechanical control boxes however some of it can be used to troubleshoot a control box with a printed circuit board, use what is applicable.

If you have a Printed Circuit Board in your control box click here for more information.

Important Note: To troubleshoot your spa, you will not only need basic tools, but will also need a multi-meter that can check for Voltage and Resistance (Ohms). It would be impossible to troubleshoot your spa without one. Make sure the batteries are fresh in the meter to insure you get accurate readings.



Click on a Problem to See the Solution


GFCI trips when powering up the system or when calling for heat.
Spa won't heat.
The water gets too hot.
Nothing works
Water leaks from around the shaft of the pump motor.
I can't seem to find the leak in my spa.
When I push the activation buttons (air buttons) on the topside, nothing happens

DISCLAIMER:We at the Spa Care Center use the same troubleshooting techniques that have been provided to you and are fully confident that they work. But, when dealing with water and electricity, it always provides a danger that must be respected. Therefore, we will not be responsible for any bodily injury that may occur when repairing your spa. Please be very careful!

We are currently closed for restructuring. We will be back soon.
Need assistance? We can be reached at [email protected]
TOP Email Us